STEP BY STEP CUP SEAL ACCESS
The following steps will provide easy accessto the Cup Seal (#12).
The sign of a worn out Cup Seal (#12) is the presence of CO2/Compressed Air leaking down the barrel.
STEP 1 Loosen the Disconnect Hose (#290) from the collar.
STEP 2 Loosen the 2 set screws M5x12 (#16).
STEP 3 Remove the Fore Grip Handle (#327).
STEP 4 Loosen the 2 set screws M5x12 (#16).
STEP 5 Remove the Shroud (#322).
Once the steps have been completed, this will allow the Reservoir Plug (#254) to slide out with the Valve Spring (#10C), Cup Seal Guide (#11), Cup Seal (#12) and Valve Pin (#13).
HELPFUL TIP: Please note how the parts are removed for easy reassembly.
Always remove the Air Tank before any disassembly of your Spyder MR3 paintball marker. Do not remove the Valve Body (#14) unless specific Valve Body repairs are needed. If needed, remove Valve Body with a long, softtipped object such as the eraser end of a pencil. Do not remove the Valve Body with a screwdriver as it will damage the Valve Body and cause air leaks. NOTE: Valve Body (#15) screw must be removed prior to taking out the Valve Body.
Spyder MR3 Manual
Spyder MR3 Paintball Gun and Compressed Air Tank
Spyder MR3 Paintball Gun Electronics and Settings
Spyder MR3 Paintball Guns Battery Charging
Spyder MR3 Paintball Marker Velocity Adjustment
Spyder MR3 Disassemble Reassemble and Cleaning Internals
Spyder MR3 T-Cocking Removal
Spyder MR3 Anti Chop Eyes
Spyder MR3 Paintball Gun Schematics
How to get free paintball stuff. You have to know about free Target $500 gift card.
