The Anti Chop Eyes help prevent chopping paint by not allowing the marker to fire until a paintball is in front of the Venturi Bolt. The Eyes transmit a beam across the inside of the breech. The Circuit Board is preset from the factory and does not need to be adjusted or altered. If the Eyes are ON and do not see each other when firing your marker, you will have to clean the Eyes.
Spyder MR3 Cleaning The Anti Chop Eyes
Using a squeegee or swab thru the breech should clean the Eyes enough for the beams to detect each other. Another way is to use an aerosol can of air thru the breech to remove paint or dirt from the Eyes. To thoroughly clean the Eyes remove all M4 x 8 Screws (#294) (including the lower screw not pictured which holds the Feed Neck), the Eye / Detent Cover (#329) and the Feed Neck (#321) using an allen wrench. Once the M4 x 8 Screws (#294), Eye / Detent Cover (#329), and Feed Neck (#321) are removed, precede with a soft pinch to remove the Eye Wire Harness (#243) from the receiver. Remove all dirt or paint that is blocking the Eyes and causing it to malfunction.
IMPORTANT: Cleaning the Eyes often will help reduce dirt, paint or oil residue that blocks the Eyes from seeing each other.
NOTE: Never attempt to rush the cleaning process or you can pinch the wires and cause the marker to malfunction with the Eye Mode ON. Take precaution not to over tighten the M4 x 8 Screw (#294) or this can lead stripping the head.
CHANGING THE BALL DETENTS
Experiencing paint rolling through the barrel, can be related to small diameter of paintballs or the lost of a ball detent(s). When removing the Eye / Detent Cover (#329) and Feed Neck (#321) the Ball Detents (#03) will become accessable to be cleaned or replaced.
HELPFUL TIP: Please note how the parts are removed for easy reassembly.
NOTE: Take precaution not to over tighten the M4 x 8 (#294) or this can lead to stripping the head.
Spyder MR3 Manual
Spyder MR3 Paintball Gun and Compressed Air Tank
Spyder MR3 Paintball Gun Electronics and Settings
Spyder MR3 Paintball Guns Battery Charging
Spyder MR3 Paintball Marker Velocity Adjustment
Spyder MR3 Disassemble Reassemble and Cleaning Internals
Spyder MR3 T-Cocking Removal
Spyder MR3 Cup Seal Removal
Spyder MR3 Paintball Gun Schematics
How to get free paintball stuff. You have to know about free Target $500 gift card.
