What is a Spyder Paintball marker?
This is a paintball marker made by Kingman International. The main corporation is in Tiawan with an office in California. The Spyder paintball marker is two-tubes that is stacked vertically. It is a open bolt, blow-back marker. There are many configurations available to the public. This is a great paintball marker for the new guy in the sport.
What Spyder is the best?
It all depends on what you want. If you plan on upgrading over the next few months, then I suggest the Spyder Compact 2-in-1 or the Spyder Compact 2000. If you want something that is a great shooter and will not be upgrading for awhile, then I suggest either the Spyder TL Plus or the Spyder Xtra. Want to get a taste of electro markers? The Spyder E99 and Spyder Flash are great. For a true electro marker for the budget player, then the Spyder EM1 is a great choice. Other than that, they all perform the same.
How often should I clean my Spyder?
The cleaning process is very easy for the Spyder.
I got my new Spyder and I want to upgrade now. What should I get?
There are so many upgrades available for the Spyder. Not all will improve the perfomance of your marker. I would consider an agitating hopper, a new barrel, and a regulator as the first three upgrades.
What is the best barrel?
There are so many barrels that are available. The prices of these barrels range in just as much of a variety. Is the most expensive barrel the best? Not really. Decent barrels can be purchased for $60 and under.
How can I improve my accuracy/range?
Simply put, a paintball traveling from a $1000 marker at 285fps will go the same distance and have the same accuracy as a paintball traveling from your marker at 285fps. There are some things that you can help to "control" how your marker handles paintballs. 1) A proper paintball to barrel match will help. And, 2) a regulator to provide the marker with a consistant pressure. No bolt or valve will increase distance and accuracy.
What is a regulator and an expansion chamber?
An expansion chamber is a device that will try to "catch" liquid CO2 from getting into your marker's valve area and cause seals to break or cause large velocity increases. There in the shape of a fore grip. However, there not very reliable. You will still get velocity increases. I suggest an anti-siphon tube installed when using a CO2 tank. A regulator is much better than an expansion chamber. This device will feed the marker a consistant level of air. Practicaly makes sudden velocity increases non-existant. Because of the consistency, you can better guess where the paintball will travel. These will not catch liquid like an expansion chamber. Best if used in conjunction of an anti-siphon tube when using CO2. Though the Palmer Stabilizer is made in such a way to catch most liquid and regulate it.
I have scratches forming on my bolt, why?
During your cleaning process, you may have found scratches on the bolt on the top end. Do not worry. This is normal wear on the bolt and will not hinder the performance. Though, you can sand the scratches out if you insist. I have even heard of people claiming that if you polish the internals, no more scratches. There really is not need to replace the bolt. Of all the bolts that I have tried, none is better than the stock bolt. Though, there is room for improvement.
What is a better valve?
Believe it or not, there are no valves better than the stock one for regular use. However, for specialized setups like low pressure, a higher flowing valve is needed. Also, in some rare cases of recocking problems, the valve could be replaced.
My Spyder will not re-cock when I fire!
Having re-cocking problems everytime you shoot? This is usually due to several things to numerous to list here.
There is gas leaking down the barrel!
This is a common problem among Spyders (and other similar markers). And is a very simple fix. First, try cocking your marker, then screwing on your air tank. Still a leak? If so, replace the cup seal. Refer to the Assemble and Disassemble article. If it still leaks, then it may be the valve o-ring, the valve is installed backwords, or the valve body iteslf.
What is the difference between a vertical feed and a power feed?
A verticle feed is found on the Spyder Xtra and the Spyder Flash. It is in a verticle position on top of the markers body. A powerfeed is on a 45* angle that lays across the body of the marker like on the Spyder TL Plus and Spyder Compact 2-n-1. The verticle feed can feed about 1-3 balls per second faster than a Power feed. however, you cannot sight over the top of the marker while shooting.
What is the difference between a cradle and a drop forward?
There really is no difference in them any more. It used to be that a drop forward was specifically made to hold CO2 tanks. A cradle was designed to hold nitro tanks. Very few companies stick to this system. But now a days, these upgrades are pretty much universal.
How to get free paintball stuff. You have to know about free Target $500 gift card.
